Configuring the Scan Output Table

The following table outlines the device-dependent information you must provide for the BSAP protocol in the scan output table attribute.

  Field Number Field Name DE Type Possible Values
Device Independent 0 point control rtLOGICAL 0=disabled, 1=enabled
1 point status rtUINT8 §To configure the scan input table
2 reserved1 rtINT16  
Device Dependent (BSAP scan task specific) 3 base rtBYTES12 (see below)
4 extension rtBYTES8 (see below)
5 attribute rtBYTES8 (see below)
6 object type rtUINT8 (see below)
7 write mask rtUINT8 (see below)
8 array/list # rtUINT8 (see below)
9 reserved2 rtUINT8  
10 start rtUINT16 (see below)
11 end rtUINT16 (see below)
12 msd rtUINT16 (see below)
13 reserved3 rtUINT16  
Optional .      
.      
.      

See also: