The following table outlines the device-dependent information that you must supply in the scan input table attribute for the BSAPScanner:
Field Number | Field Name | DE Type | Possible Values | |
---|---|---|---|---|
Device Independent | 0 | point control | rtLOGICAL | 0=disabled, 1=enabled |
1 | point status | rtUINT8 | §To configure the scan input table | |
2 | poll type mask | rtBYTES4 | 32-bit mask | |
3 | st buffer size | rtUINT16 | 0, 1, 8, 108, 116 | |
4 | SSMA offset | rtUINT32 | 12 to 4,294,967,295 | |
5 | # of elements | rtUINT16 | 1 to 65,535 | |
6 | RTAP DE type | rtUINT8 | 1 to 31 | |
7 | deadband type | rtUINT8 | §To configure the scan input table | |
8 | deadband | rtDOUBLE | any double | |
9 | link address | rtDB_XREF | ||
10 | reserved1 | rtINT32 | ||
Device Dependent (BSAP scan task specific) | 11 | base | rtBYTES12 | (see below) |
12 | extension | rtBYTES8 | (see below) | |
13 | attribute | rtBYTES8 | (see below) | |
14 | object type | rtUINT8 | (see below) | |
15 | reserved2 | rtUINT8 | ||
16 | field selector | rtUINT8 | (see below) | |
17 | array/list # | rtUINT8 | (see below) | |
18 | start | rtUINT16 | (see below) | |
19 | end | rtUINT16 | (see below) | |
20 | msd | rtUINT16 | (see below) | |
21 | reserved3 | rtUINT16 | ||
Optional | . | |||
. | ||||
. |
See also: