The following table outlines the device-dependent information that you must supply in the scan output table attribute for the BrdcastScanner:
| Field Number | Field Name | DE Type | Possible Values | |
|---|---|---|---|---|
| Device Independent | 0 | point control | rtLOGICAL | 0=disabled, 1=enabled |
| 1 | point status | rtUINT8 | §To configure the scan output table | |
| 2 | reserved1 | rtINT16 | ||
| Device Dependent (Broadcast scan task specific) | 3 | type | rtUINT16 | 0 to 65535 |
| 4 | reserved2 | rtUINT16 | ||
| Optional | . | |||
| . | ||||
| . |
See also: