Fields to Configure in the Scan Input Table

Field Name Description
sv This field specifies the SV for asynchronous messages from the GPS receiver. This field is only valid for the ephemeris and observation command. This field is also sent as part of a read command.
command

This field specifies which message type is associated with this scan input record, and can be:

Value Description
1 elevation mask
2 navigation mode
3 port baud
4 GDOP limit
5 SV enable
6 SV disable
7 data format
8 data blocks
9 sample interval
10 osc steering
11 time base
13 configure command
15 leap seconds
16 ephemeris data
17 observation data
18 antenna (position) data
19 satellites tracking now
20 reference station position
srbx This field specifies that this record is for data that is received from the GPS receiver asynchronously.