The following table outlines the device-dependent information that you must supply in the scan input table attribute for the Rt2RtScanner:
| Field Number | Field Name | DE Type | Possible Values | |
|---|---|---|---|---|
| Device Independent | 0 | point control | rtLOGICAL | 0=disabled, 1=enabled |
| 1 | point status | rtUINT8 | §To configure the scan input table | |
| 2 | poll type mask | rtBYTES4 | 32-bit mask | |
| 3 | st buffer size | rtUINT16 | 0 | |
| 4 | SSMA offset | rtUINT32 | 12 to 4,294,967,295 | |
| 5 | # of elements | rtUINT16 | 1 to 65,535 | |
| 6 | RTAP DE type | rtUINT8 | 1 to 31 | |
| 7 | deadband type | rtUINT8 | §To configure the scan input table | |
| 8 | deadband | rtDOUBLE | any double | |
| 9 | link address | rtDB_XREF | ||
| 10 | reserved1 | rtINT32 | ||
| Device Dependent (RTAP to RTAP scan task specific) | 11 | remote address | rtBYTES48 | (see below) |
| 12 | direct address | rtDB_XREF | (see below) | |
| 13 | size | rtUINT16 | (see below) | |
| 14 | data type | rtUINT8 | (see below) | |
| 15 | reserved2 | rtUINT8 | ||
| Optional | . | |||
| . | ||||
| . |
See also: