This example shows a scan device point set up for SRBX from the RTU. Note that the "unsolicited" field has been set to one.
| Point Name - Rtu 02
Alias - DNP RTU 02 Residence = Ram Categories = 00000000000000000000000000000001 CE Indicator = Enabled CE Order = Natural |
||
|---|---|---|
| Attribute Name | DE Type | Value |
| device poll types | rtBYTES4 | (0x)00000004 |
| device PRBX types | rtBYTES4 | |
| scan input control | rtLOGICAL | 1 |
| scan input status | rtUINT8 | |
| failure threshold | rtUINT8 | 3 |
| scan input | (see below) | |
| scan output control | rtLOGICAL | 0 |
| scan output status | rtUINT8 | |
| scan output | (not used) | |
| dev fail threshold | rtUINT8 | 3 |
| remote ID | rtUINT16 | 35001 |
| comm info | ||
| comm optimization | rtLOGICAL | 1 |
| message timeout | rtUINT16 | 1000 |
| message retries | rtUINT8 | 0 |
| debug level | rtUINT8 | 0 |
| clear stats | rtLOGICAL | 0 |
| device stats | rtUINT32 | |
| point control | poll type mask | st buffer size | # of elements | RTAP DE type | deadband type | deadband |
|---|---|---|---|---|---|---|
| 1 | (0x)00000000 | 0 | 1 | 1 | 0 | 0 |
| 1 | (0x)00000000 | 0 | 1 | 1 | 0 | 0 |
| 1 | (0x)00000000 | 0 | 1 | 1 | 0 | 0 |
| 1 | (0x)00000000 | 0 | 5 | 1 | 0 | 0 |
| 1 | (0x)00000000 | 1 | 1 | 7 | 0 | 0 |
| 1 | (0x)00000000 | 1 | 1 | 7 | 0 | 0 |
| 1 | (0x)00000000 | 1 | 1 | 7 | 0 | 0 |
| 1 | (0x)00000000 | 1 | 1 | 7 | 0 | 0 |
| function code | object code | object variation | qualifier | range start | range length | bit | count | unsolicited |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 0 | 0 | 0 | 1 | -1 | 0 | 1 |
| 1 | 1 | 0 | 1 | 0 | 1 | -1 | 0 | 1 |
| 1 | 1 | 0 | 2 | 1 | 1 | -1 | 0 | 1 |
| 1 | 1 | 0 | 3 | 2 | 5 | -1 | 0 | 1 |
| 1 | 20 | 0 | 0 | 3 | 1 | -1 | 0 | 1 |
| 1 | 20 | 0 | 1 | 0 | 1 | -1 | 0 | 1 |
| 1 | 20 | 0 | 2 | 1 | 1 | -1 | 0 | 1 |
| 1 | 20 | 0 | 3 | 2 | 1 | -1 | 0 | 1 |