The following table outlines the device-dependent information you must provide for the DNP 3.0 protocol in the scan output table attribute.
| Field Number | Field Name | DE Type | Possible Values | |
|---|---|---|---|---|
| Device Independent | 0 | point control | rtLOGICAL | 0=disabled, 1=enabled |
| 1 | point status | rtUINT8 | §To configure the scan input table | |
| 2 | reserved1 | rtINT16 | ||
| Device Dependent (DNP 3.0 scan task specific) | 3 | function code | rtUINT8 | (see below) |
| 4 | object group | rtUINT8 | (see below) | |
| 5 | object variation | rtUINT8 | (see below) | |
| 6 | qualifier | rtUINT8 | (see below) | |
| 7 | range start | rtUINT32 | (see below) | |
| 8 | range length | rtUINT32 | (see below) | |
| 9 | time | rtDB_XREF | (see below) | |
| 10 | control code | rtUINT32 | (see below) | |
| 11 | status result | rtDB_XREF | (see below) | |
| Optional | . | |||
| . | ||||
| . |
See also: